About markbednarz

markbednarz · 01-18-2008

I am new to firewalls, so please excuse my ignorance. My company has several PIX 501 firewalls in place for a SCADA project. We have 2 more to add in. I have used the same configuration from one of the known-good PIXs for my new PIXs aside from putti...

markbednarz · 07-27-2009

This was EXTREMELY helpful! I don't access my PIX firewalls too often because they are all working flawlessly. I went to update an ACL on one and couldn't get to it. Thanks for saving me a drive to the remote site!

markbednarz · 01-24-2008

Hi Jorge,This was in fact a router issue. Both the closest-hop router and the main router needed the route defined and it's working like a charm now. Thanks so much for your help!-=Mark

markbednarz · 01-23-2008

Hi Jorge,Adding the statement in did not change my ability to ping the PIX. I'm still trying to check the router situation out. The person I replaced had not documented the password to access the router so I am trying to get that information from the...

markbednarz · 01-22-2008

Hi Nagel,For my PIX that can't ping anything the routes are as follows:outside 0.0.0.0 0.0.0.0 10.21.0.1 1 OTHER staticoutside 10.21.0.0 255.255.0.0 10.21.0.2 1 CONNECT staticinside 10.26.0.0 255.255.0.0 10.26.0.2 1 CONNECT staticThe router that this...

markbednarz · 01-22-2008

Hi Jorge,Over the weekend I was starting to think that this might be a routing issue as well. I didn't see your reply back until now (Tues morning), but I think you may be right. I'll check things out and get back to you.Thanks,-=Mark

Member Since	‎01-18-2008 07:00 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

Identical pix501 configs, but one won't work

Re: PIX501 PDM question

Re: Identical pix501 configs, but one won't work

Re: Identical pix501 configs, but one won't work

Re: Identical pix501 configs, but one won't work

Re: Identical pix501 configs, but one won't work