Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA5505 setup for remote VPN access. Inside the network we have a terminal server we use for different applications. When I am connected with my laptop over the remote vpn and rdp into the server, I am not able to print to my local printe...
I have an ASA5505 configured for remote VPN connection. It works fine for the two of us who use it. However, I tried to connect another computer from a different location. The connection was made, however it is not able to open a session on our te...
I have an ASA5505. I am having a problem accessing the configuration through the ASDM with my server. I can access it from my laptop. Both the laptop and the server are on the inside with the same IP structure. The server will connect and go thro...
I have an ASA5505 configured for Remote VPN connection. I am adding an IP phone server that will allow remote IP phones to connect to the internal phone system. I need to Port Forward port 59002 to an internal IP address. Is there an easy way to d...
I have an ASA5505 set up for one site to site VPN and one remote access VPN. Everyone on the inside network had access to the internet. This is no longer working. I can still access my server from the other end of the VPN connection so I know ther...
Thanks!! I went back and installed an updated version of the driver on the server. I noticed there was another printer already configured which happened to be the default printer. It is no longer in service. I changed its driver to the new driver...
John, Yes, I can ping my assigned IP from an RDP session. This is happening with other computers. I am on a Vista machine. I have an XP with me that I will try. The printer is connected USB to my laptop. This is the first time we have tried th...
John, Here is part of the config. Yes, we are using VPN client. Once connected with VPN client, we open an RDP session on the terminal server to use the applications on the server. I need to print from those applications back to my printer connec...
OK, I have the split tunneling setup. I can ping my laptop from the computer but I still cannot see the computer or printer as either as an option for printing or from trying to install the printer on the server. Any suggestions? Thanks!! Ke...
Thanks, I will look at this. I did have the Verizon router changed to 192.168.1.254 and increased the DHCP IP addresses to .50. This worked. Thanks again!
