Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When I try doing a packet trace from an inside IP to an outside IP it says that there isn't a route. Although, I do have the following line in my config:route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1xxx.xxx.xxx.xxx is the next hop to the outgoing ro...
Will the packet tracer work if a interface is down? My understanding is that I can use this to test my configuration before bringing everything up. Is this correct?Thank you,Travis
no, there are other static routes listed that I have setup, but not the default. I am running the latest 8.0.4.And just to be clear there isn't a cable plugged in to the outside port. I'm assuming that it shouldn't matter, but am starting to wonder i...
Actually, I was using the packet tracer in ASDM. I set the interface to inside, the packet type to TCP and the source/destination ports to 80. I set the source IP to an inside IP and the destination IP to an outside IP. When ran it says: No route to ...
