Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Sylogs show that Cisco 5520 tears down all ICMP connections coming from one to another internal VPN tunnel host.VPN tunnel addresses are assigned through Address pool172.16.8.0/24 For example, once VPN connection established host 172.16.8.1 cannot pi...
VPN Remote clients are successfully authenticated through Steel-Belted Radius when connecting to Cisco5520.For some wierd reason those sessions are not visible in "Current sessions" of the SBR Administrator although Radius logs confirm that the sessi...
Two recently purchased ASA5520-K9 vere delivered to us with software v7.0(7).We have successfully configured them and finally updated to the latest release of the v7.0.x i.e. v7.0.(8). The ASA5520 with v7.08 are not yet in the PROD environment but t...
Hello all,We have an issue with McAffe EPO engine v3.6.0.574 while rebuilding users' GuIDs for the users connected through VPN with VPN client v4.8.02.0100. The EPO rebuilds the GuID using the user's MAC address. The problem is that the VPN client v4...
Rick, Done. after applying "same-security-traffic permit intra-interface" pings (icmp) are working between hosts on the VPN tunnel (172.16.8.0). 1. Somehow it works for icmp packet but not for the rest of the ip traffic. Could you please suggest, wha...
Rick,Done. after applying "same-security-traffic permit intra-interface"pings (icmp) are working between hosts on the VPN tunnel (172.16.8.0).Could you please suggest, what is an "access list" command that would allow for example, any ip traffic betw...
Rick, I appreciate your prompt reply.If the security level of the private interface is at 100 and that of the public one at 0 by default, you mean that I should set the security level of the public one to 100 and enable the network traffic between th...
