About peyman_nabati

peyman_nabati · 06-07-2008

I have set up a sit-to-site VPN by two PIX 501 firewall which are connected to public internet by two PPPOE account. As of now the VPN tunnel works fine and main and remote office can reach each other private network perfectly. Also PIX firewall on e...

peyman_nabati · 06-10-2008

Hi farrukh,Thank for keeping up with my questions. I got your points how to use the example configuration you sent me. But in that example on server side, one public IP address were assigned to router outside interface and another public IP address w...

peyman_nabati · 06-09-2008

Dear farrukh,As I said, my PIX lets me connect to a PPTP client from inside local network to a PPTP server outside in public internet as it is detailed out in the document you referred me to by havign this lines in my PIX config:label of section in t...

peyman_nabati · 06-08-2008

Hi Farrukh,Thanks again for your kind comment. The link you asked me to visit does cover this topic ("Allow L2TP Over IPsec Through PIX/ASA 7.x and Above") but again it is for PIX 7.0 and above. Mine is PIX 6.3. It seems I am not lucky to have this w...

peyman_nabati · 06-08-2008

Hi Farrukh,Thanks for your note. Now that I know I do not have a chance to pass through my Remote office traffic thorugh PIX, Is there a chance I set up a PPTP server on Main Office and use PPTP client on Remote side to connect through the tunnel of ...

Member Since	‎06-07-2008 11:42 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

Passing whole remote office teraffic through site-to-stie VPN (Pix 501)

Re: Passing whole remote office teraffic through site-to-stie VP

Re: Passing whole remote office teraffic through site-to-stie VP

Re: Passing whole remote office teraffic through site-to-stie VP

Re: Passing whole remote office teraffic through site-to-stie VP