Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI am trying to migrate to a ASA5505 from our pix.Most of our network uses PAT on our outside interface but I have a small pool of address which I NAT to on the inside, but when I do this they are unable to VPN out to remote sites.This worked great ...
HiIt did work. I checked whatsmyip to confirm it was translating ok.I can see udp 500 coming back to the client but udp 4500 only gets back as far as the outside interface but never exits the internal interface to reach the client.So the NAT is defin...
HiThe PC is 10.2.200.80The old Pix line used to be static (inside,outside) 10.2.254.80 10.2.200.80 netmask 255.255.255.240for sixteen addresses.I have just got it to work by using the following two linesglobal (outside) 2 10.2.254.80nat (inside) 2 10...
Hi This is not a connection to the ASA. But a connection through it whilst using a NAT'd IP.I have assigned a NAT to a PC on the inside of the ASA but when the PC opens a cisco vpn client and tries to connect to a remote cisco firewall the user is un...
