About peter0023

peter0023 · 09-18-2018

Hi all I have FTD 2130 version 6.2.3.2 , I'm facing that server trace e.g. 8.8.8.8 always show * I had read many articles , I had tried 1. set policy from outside to inside allow icmp all 2. add flexconfig with policy-map global_policy ...

peter0023 · 09-18-2018

still not workingaccess-list CSM_FW_ACL_ remark rule-id 268440659: ACCESS POLICY: default - Mandatoryaccess-list CSM_FW_ACL_ remark rule-id 268440659: L7 RULE: icmp-testaccess-list CSM_FW_ACL_ advanced permit icmp any any unreachable rule-id 26844065...

peter0023 · 09-18-2018

hi , please refer> show running-config access-groupaccess-group CSM_FW_ACL_ global> show running-config access-listaccess-list CSM_FW_ACL_ remark rule-id 268440659: ACCESS POLICY: default - Mandatoryaccess-list CSM_FW_ACL_ remark rule-id 268440659: L...

peter0023 · 09-18-2018

hi , please referC:\Users\Administrator>tracert -d 8.8.8.8Tracing route to 8.8.8.8 over a maximum of 30 hops 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request ti...

peter0023 · 09-18-2018

Are you serious?Just traceroute not working, others are workingAny better ideal ? thanks =======update======= I fixed , thanks all

peter0023 · 09-18-2018

hi sirthanks , in our scenario there is only one FTD , so server's gateway is FTD.scenario:server1-----|server2-------- SW ----FDTserver3-----| 　　|-------------ispis there have another need check ? thanks

Member Since	‎09-18-2018 05:36 AM
Date Last Visited	‎09-28-2018 12:06 AM
Posts	7

User Statistics

User Activity

Still can't traceroute through FTD (6.2.3.2)

Re: Still can't traceroute through FTD (6.2.3.2)

Re: Still can't traceroute through FTD (6.2.3.2)

Re: Still can't traceroute through FTD (6.2.3.2)

Re: Still can't traceroute through FTD (6.2.3.2)

Re: Still can't traceroute through FTD (6.2.3.2)