Hi rasmus.elmholt
You should open a case with TAC because that message may or may not be expected depending on how the ASIC forwards the packet. Also, Do you have a problem with the box or just want to learn how to use the tool?
Regards,
Hi Rasmus
How are you did capture it? Can you confirm that the packet is received on one of the interfaces?
The FED capture should be handle using the RX packet to know the forward decision for the egress decision, also consider those error logs are ...
Hi rasmus.elmholt
I see, you tried to understand how the switch processes the packets in FED (Forwarding Engine Driver), the error is because in your capture you are using the interface Two 2/0/38 into the FED CLI command but the interface where you...
Hi quantkela56
Answering your concern, one of the requirements to build SVL, the SFP must be Cisco branding, third-party SFPs for SVL are not supported.
Restrictions for Cisco StackWise Virtual
Only Cisco Transceiver Modules are supported.
Refere...
Hi deepak-kumar3
The short answer is no, C9200/C9300 only supports back-to-back stacking (short-range physical connection) and C9400/C9500/C9600 supports StackWise Virtual where the connection can be made by Fiber cable.
Reference Doc:
https://www....