Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good Day, So here's our configuration for the Cluster:cluster group ASA-Cluster local-unit ASA-2 cluster-interface GigabitEthernet1/8 ip 172.200.200.120 255.255.255.0 priority 50 console-replicate health-check holdtime 3 health-check data-interface a...
Hi everyone, can you guys help me with this one? From the topology, PC1 to PC3 needs to connect with the Server using ssh.Here's the details:[IP Address]1. PC 1 : 192.168.1.2 2. PC 2: 192.168.2.23. PC 3: 192.168.3.24. SSH Server: 10.109.80.855. TP Li...
What about having two CCL? One CCL connected between ASA firewalls and the second connects from the Firewalls to a Switch. When one Firewall goes down, will the port-channels still be up and running? Since the CCL connected from firewall to switch is...
Hi, Thanks for your reply. Here's our config & Topology for the ASA: There's only one CCL in between of the firewall that is configured in Interface Gigabit 1/8All other interfaces are data interface.Is there a work around like having another port ch...
Can I also configure a CCL to a switch and make another cluster link interface configuration on the Cluster Group? If so, will the data portchannels stays UP even though 1 CCL is down?
HiI already tested your suggestions. From the syslog of ASA,***I was able to see the dynamic TCP translation of 192.168.1.2 ---> 1.1.1.21 6 Feb 11 2019 11:26:44 192.168.1.2 59497 1.1.1.1 22 Built outbound TCP connection 13088 for outside:1.1.1.1/22 (...
