Acerca do anderson_araujo1

anderson_araujo1 · 07-25-2016

Instalei e configurei o Access Point AIR-SAP1602I-T-K9, ele está propagando, está autenticando, ficou tudo ok, porém o sinal ficou muito fraco, mais baixo que os roteadores mais simples, mesmo alterando os canais. Alguém sabe se tem alguma configuraç...

anderson_araujo1 · 06-24-2016

Cisco Aironet 1600 function only in 54mb, how to configure for function in 150mb or 300mb?

anderson_araujo1 · 07-27-2016

to improve the signal or access point must must be installed on the ceiling?How does the spread of the access point 1602I signal?Is there anything you can do to improve the signal strength?

anderson_araujo1 · 07-26-2016

Hi Rasika How do I change the network password wifi the end? the console

anderson_araujo1 · 07-24-2016

Hi, Rasika I Dont understand this procediment "show dot11 association <mac_address>" What he does? The signal is still weak, I need to improve the power to put the two aironets production.I need help.I'm waiting , thanks a lot!

anderson_araujo1 · 07-22-2016

I have the same problem I have Access Point Cisco 1602I-T-K9 is set up, butwith a very weak signal, where I set to leave the strongest signal?

anderson_araujo1 · 07-21-2016

Hi I put on channel 11 I run the command show dot11 association, he did not bring any results The signal remains weaker than a simple conventional router How to increases the power of the signal? [dBm]signal [dBm]

Membro desde	‎06-24-2016 11:54 AM
Data da última visita	‎08-18-2017 03:53 AM
Envios	25

Estatísticas do usuário

Atividade de usuário

Access Point AIR-SAP1602I-T-K9 com sinal fraco

Cisco Aironet 1600 function only in 54mb, how to configure for function in 150mb or 300mb?

to improve the signal or

Hi

Hi,

I have the same problem I

Hi