Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have register the Base license for CSC SSM for the active and passive unit, but it works only on the active, because there are no DNS Server entry in the connection settings on the passive unit. The reason why it doesn't work is that the units cann...
Hello, I will upgrade the asa 5510 from 256 MB RAM to 512 MB RAM. But I have read that some asa5510 firewalls have 1 slot and others 4 slots for RAM. How can I find out without open the case how many slots are available?thanks,Gernot
Hello, I will upgrade the asa 5510 from 256 MB RAM to 512 MB RAM. But I have read that some asa5510 firewalls have 1 slot and others 4 slots for RAM. How can I find out without open the case how many slots are available?thanks,Gernot
Hello, I have also upgraded to 9.18.4.34 on a Firepower 4100 and now I get following message during the Deployment with the CSM 4.24:
The device provided the following description: CSM_MANAGEMENT_CRED_username XXXXXX password ****** encrypted privile...
Hello, yes there is a configuration on both but on the passive there is no DNS entrys. I can add an DNS Server, but after i push the save button the field is empty again.Independant?http://www.cisco.com/en/US/docs/security/csc/csc60/administration/g...
Hi Kampana, thank you for you reply, but what does it mean below?Some Cisco ASA 5510 have only a single memory socket, see Figure 4-24. while others havefour memory sockets. In both cases, remove the existing DIMM, and replace it with the newone. In ...
