Hi,If you place a BDC or PDC in the DMZ you will be able to logon from your inside network to to PDC or BDC in the DMZ. For this task you don't need to open any Netbios port.I will not recomand that you open any port from your DMZ to your Inside.Hope...

HI,If you have no echo reply it might be because you need to open a conduit which will let your outside connection get to your inside ips.static (inside,outside) 63.240.71.114 10.15.49.6 netmask 255.255.255.255 0 0the above static command will allow ...

HI,First you might want to use a clear xlate command to clear all translation on the firewall. If it doesn't do it make sure you have your global in. Look like your firewall is not translating.Hope it help.You can send me your config i'll be more tha...

Don't use the static command from user in your inside network. if you have to open port 80 put it in the DMZ. Hope it help

HI,If only people from your inside network are going to use websense, then I would say Inside network. Put it on the DMZ if other branches needs to be filtered by websense.Hope it helped 