About Ryanmatthew23

Ryanmatthew23 · 01-17-2014

Hi all,I need help setting up internet access on my cisco router.It's a Cisco 2600, this is the setup.I have a Cisco 3560 switch, and 5 clients connects to this switch.I have one vlan defined VLAN 5.I have a trunk port between the router and the swit...

Ryanmatthew23 · 09-29-2012

I am trying to join a Cisco Catalyst 3560X-24T-L to an existing VTP domain, my question is what configurations should I do to this switch?I have already gave it a hostname, setup passwords, enabled telnet, created a management address on port g0/24.I...

Ryanmatthew23 · 07-23-2012

I have a WAN router that's on 172.x.x.x segment, and another WAN router that's on a 147.x.x.x segments.How can I make them communicate, I would like to interconnect both segments to talk to each other.We are using a Cisco 2800 on both segments. ...

Ryanmatthew23 · 09-29-2012

Thanks, this really did help. gi0/24 is a management port, I'm not sure what better way to explain this, I have 4 switches on vlan 13, each switch has an ip assigned to gi0/24 with different ip addresses so I can manage each switches individually. I'...

Ryanmatthew23 · 09-29-2012

Ok, so I am trying to figure out the best way to explain this. I have many VLAN within my VTP domain, I know once I setup the switch as a vtp client it will propagate to the switch, but won't it propagate all vlans to the new switch? How can I tell i...

Ryanmatthew23 · 09-29-2012

But how can I tell it what VLAN I want it to be on? I want it to be on VLAN 13, where is this done at? On the main VTP server switch, or on the new switch?

Ryanmatthew23 · 07-23-2012

Thanks for all your help, but I figured the best way to get this answered was to goto the Metro E provider. So this is what they are recommeding, the two Layer 3\Router devices will be on the same segment for communication purposes, the the two layer...

Ryanmatthew23 · 07-23-2012

I'm sorry Richard to simplify my question, I have one WAN router located at (location A) on the following segment 147.x.x.x, and another WAN router at (location B) that I would like on the following segment 172.x.x.x, they will both be connected via ...

Member Since	‎07-23-2012 11:56 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	9

User Statistics

User Activity

Setting up a Router & Switch for internet access

Joining a switch to VTP domain

How to allow communications between network segments

Re: Joining a switch to VTP domain

Re: Joining a switch to VTP domain

Joining a switch to VTP domain

How to allow communications between network segments

How to allow communications between network segments