I've recently upgraded from DSL 3M/384K to Cable "up to" 28M/2M. I've been using and RV042 for years. With the new service, I now show 28% small and large packet loss and 15% at the router WAN IP. If I connect the Cable Modem directly to the comp...
Hello. Thanks for replying.Yes, I've tried all sorts of tests and they produce similar results. When the system is connected directly into the Motorola Cable Modem, I get full download and upload speeds. I'm only concerned with WAN results, at pre...
Anyone have further thoughts? I'm sure that the RV042 when connected to a full duplex 100M NIC should be able to get 28Mbit down/3mbit up. I'm not sure why I get loss with small packets when connected through it, but everything fine when connected ...
Hi davicarr,Yes, I'm using v1.3.12.19tm.My computer has a 10/100 Ethernet card, but indication is that it isconnected at 100mb/s to the router. I've even changed auto on the router toselect 100. Are you aware of others able to attain downstream spe...
Hi. I'm still having performance issues/packet loss when RV042 in place. I do have SPI disabled and have set bandwidth. Since bandwidth seemed to do the trick, here and I only have one wan/isp connection required, is there a way to disable this fu...
Is it possible/has anyone gotten greater than close to 10mb/sec download speeds with the RV042? I'm getting much better than expected upload at about 3.5mb, but should be seeing 28mb down. I've tested here: http://nitro.ucsc.edu and there's a comme...
