Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How to ensure maximum client compatibility and stability in 802.11a/b/g/n networks?I am running a Wireless network based on the WLC 5508 6 SW version, (with WCS mgmt) and 1142 APs. I would like a broad variety of clients, old G clients and new N clie...
Hi!My firewall admin was asking me why UDP port 12223 and UDP port 5246 to broadcast (255.255.255.255) keep showing up as top blocked ports from my AP VLAN, I have not figured this out myself, maybe someone here knows?I have the following setup1142AP...
Hey! I implemented your suggested improvements and the first impression is good!on 802.11a and b/g I disabled lower datarates, set 12Mbps to mandatory and the higher ones to supported. The instant improvement was the RTT measurements I made (previous...
Hi! thank you for sharing,WMM is set to enabled, and clients report 144Mbps or sometimes as high as 300 Mbps (from the windows/ MAC wireless property page)QoS I left with the default values that came with the controller, I think it was "best effort" ...
Hi!This is interesting, then you should compare the configuration on both your WLANs and see which parameter is different.Unfortunately I have this problem on both the internal and the external WLAN.I am not sure of how to export the configuration of...
I understand that when in the process of associating with the controller, I would see this traffic. However, I was seeing this traffic on a regular basis, several weeks after all my APs had successfully associated with my controller via layer 3 CAPWA...
