About carlocon

carlocon · 01-13-2021

I reserved the lab to try again ansible scripts (second time), however now seems I am not able to even start virl simulation, from other post I found that I need to start the nodes (on past session I was able to do it). This time I am getting this me...

carlocon · 01-04-2021

When I try to execute the devenet lab for ansible_part_2 on the TASK retrieving NX-OS facts always receive something like an unsupported parameters message, I have checked reachability to the NX-OS but seems that this error mean that the Task 1 is no...

carlocon · 09-03-2020

Hi team, On the past weeks I was exploring WLC 9800 on devnet Sandbox, however lately I noticed when I try to access it that I receive the message "sandbox not found" , thought it was retired, however entering on devnet for wireless I found yet refe...

carlocon · 04-24-2020

Hi team, Starting to work with some of the sandboxes on this site, as a Wireless engineer I wanted to start with the WLC 9800 sandbox that is always on. Basically wanted to try APIs to read telemetry, however after reading the instructions I have...

carlocon · 01-14-2021

Great @bigevilbeard I'll check the link and try it this evening on the sandbox, hopefully this could be the fix to this, Regards, @carlocon

carlocon · 01-14-2021

Thanks for the recognition @bigevilbeard not sure if you were able to check the second part of the comment seems now I am stuck on example2.yaml, yesterday stayed up late trying several things but seems that no dice, any suggestion appreciated, thi...

carlocon · 01-13-2021

Hi @bigevilbeard finally I was able to execute the first example with all your recommendations, here part of the output: (nx_os) ccontrerd@DESKTOP-GVH4CDV:~/code/netprog_basics/netdevops/ansible_part_2$ ansible-playbook example1.yaml/home/ccontrerd...

carlocon · 01-13-2021

OK figured it out , the issue is executing the virl up command on the wrong directory, the topology.virl is located on subdirectory: [developer@devbox sbx_nxos]$pwd/home/developer/code/sbx_nxos[developer@devbox sbx_nxos]$ After changing to this d...

carlocon · 01-13-2021

While trying to run the Open NX-OS with Nexus 9Kv lab I tried to execute virl up command to create the NX-OS boxes, instead I kept receiving this message over and over: [developer@devbox learning_labs]$virl up Pulling from defaultException raised w...

Member Since	‎07-29-2019 10:03 AM
Date Last Visited	‎07-04-2024 01:23 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

Virl not able to start up on Open NX-OS with Nexus 9Kv sandbox

Ansible Part 2 lab responding "Unsupported parameters for (nxos_facts) when executing example1.yaml

9800 Wireless Sandbox not found

Trying sandbox for WLC 9800 but timing out

Re: Ansible Part 2 lab responding "Unsupported parameters for (nxos_facts) when executing example1.yaml

Re: Ansible Part 2 lab responding "Unsupported parameters for (nxos_facts) when executing example1.yaml

Re: Ansible Part 2 lab responding "Unsupported parameters for (nxos_facts) when executing example1.yaml

Re: Virl not able to start up on Open NX-OS with Nexus 9Kv sandbox

Re: virl issue with Sandbox-Cert error?