Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI tried to seach, but I did not find correct solution to my problem.I haveCisco ASA SEC PLUS running in Main office AOutside interface- default ISP InternetInside interface - default local lan. 192.168.1.0/24DMZ interface - other external networ...
Hellocan I do this with asa 5505 (inside 192.168.1.1):inside I have computer 192.168.1.245 (gw 192.168.1.1), which should forward all is traffic over VPN tunnel to different office to the gateway (192.168.32.1).We had before netscreen/Juniper 5GT whi...
Hellowe upgraded 5505 to SEC PLUS licence.But I cannot get to work routing not to default ISP network.we have currentlyinside network 192.168.1.1/24ISP default network nr 1 170.170.1.1/24 (default Internet connection)ISP network nr 2 170.150.150.1/24...
HelloI have tried to solve it my self, but no luck.I have this setup:ISP modem (no NAT) - Cisco ASA 5505 firewall/router (NAT enabled, 1 external IP address) - local network.I need to forward upto 5 ports to inside nework (192.168.1.0/24). Inside com...
That ping is other issue.I cannot ping DMZ interface (from inside network too), but I can ping host behind the DMZ interface. I can ping outside interface and inside (also traceroute is working) but DMZ I cannot ping.I made more testes. Looks like i ...
Still having issues I have manged to fix error "no translation group found", but still remote site does not get access to sites behind the DMZnat-controlglobal (outside) 1 interfaceglobal (dmz) 1 interfacenat (inside) 0 access-list inside_nat0_outbo...
I tried that, does not help.At least I am not getting that error, but from network 192.168.31.0 I do not have still access to networks behind the DMZ.192.168.1.0 inside network can access networks behind the DMZ.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806a5cea.shtml - I found this.My configuration looks OK, expect I need to do NAT for traffic which is going to DMZ. Right now my setup does not do NAT for DMZ...
