Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, I'm running version 8.0(3) k-8 on the ASA5505's in Active/Standby mode. Everything is operational, no known problems, except every time we rebooted the ASA's the "crypto isakmp nat-traversal" statement went to the default mode. Which is "No ...
Hello, I'm running version 8.04 on the ASA5510 and would like to add new subnets to the VPN network group. Please point me in the right direction.Thank you so much!
Hello: We have to separate two networks and we're planning to use FWSM for this project. The FWSM will be implemented as transparent mode. As create a rule to allow Protocol 88 between these two networks (both networks are running EIGRP).Q: Will this...
All, We have a ASA5510 with based license in production and we just purchased another ASA5510 with two addtion Security Plus licenses for the HA. My plan is to upgrade the license on the standby unit, then upgrade the license on the Active unit, the...
I created two new vlans on the internal network (10.20.1-2.0/24). Currently, users can not access these two subnets once they logged into the VPN. I need to make these two new subnets available via the VPN.Hope this is making sense.Thanks again,
