Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Am trying to setup a DMZ for a ASA 5506. At the moment we have 3 interfaces active on the ASA which are:gi1/1 outsidegi1/2 insidegi1/3 VoiceVoice has an internal ip with a pat on the outside interface with a public ip address from our range.No...
Hello Marius, Yes the sh conn detailed only shows connections on the outside to the voice and inside networks. NAT is correct on the voice and inside network on the sh xlate. sh mac on the uplink interface of the switch to the ASA interface is not sh...
I already have a TAC opened with our supplier, am waiting on their response. Behaviour is very strange because all interfaces from gi1/5 to gi1/8 are showing the same error. Only gi1/4 will come to a up up state but will not communicate with the swit...
Yes nameif DMZ and security-level 20. Removed the configuration on the old interface and shut it down. Did a no shut on the new interface and it stays down down.
