Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Could someone explain me how correlates severity level in WSUS requirement configuration on CAM (Critical, Medium, All) and MS Update levels for Windows 7 (Important, Recommended, Optional)?ThanksDmitry
Hi All,I have CAS, CAM, ACS and WiSM. CAS configured as OOB Virtual IP. I need to place users in VLANs according to User Groups on Active Directory.I can configure dynamic VLAN assignment without NAC using WLC->ACS-AD scheme.But How can I configure d...
We have two 4402 and 23 1242AG. 4402s use 5.2.157.0 image. All APs resets often.In the Trap Logs there are a messages that APs disassociated previously due to AP Reset. Last reboot reason: operator changed 11g mode.It happens on both controllers with...
Nicolas,thanks for your help. I have seen this document.Problem is that MS Windows 7 have not Critical update level. It has Important, Recommended and Optional.If I set Critical on CAS what should install WSUS agent on the client?
Hi Faisal!I upgraded my NAC from 4.7.2 to 4.8. It is in IN-Band mode and used for WLAN.We need to use Ipad in out WLAN with NAC.Problem is that we get error on Ipads:"Cisco Clean Access Java Applet Web client could Not be launched. The Reasons for th...
Faisal,Problem is that I really can't understand how to configure CAM/CAS for it.On the WLC we have configure dynamic interface with access VLAN and Quarantine VLAN.WLC authenticates users using ACS and accounting using CAM. As I understand WLC authe...
Faisal,Is it possible to have several VLANs in one SSID and use NAC for admisson control of these VLANs?Or I should have only one VLAN in SSID if I use NAC?Best Regards,Dmitry
