Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a ASA firewall, version 8.3.This firewall is connected with 2 interfaces, one for the LAN (let's say that the IP address is 192.168.10.254), and one for the WAN (let's say 10.10.10.254)Is it possible to configure that kind of NAT:IP Sou...
Hello all,Do you know if there is a way to deny trafic through a CISCO ASA for all non-domain users?Or do we have to use a NAC system ? (and, if yes, what kind of NAC system?)Many thanksregards,
Hi all,We have a PIX515-DMZ, with the INSIDE adress IP : 10.40.144.2We notice that we have a lot of errors:Aug 30 18:25:10 10.40.144.2 Aug 30 2006 18:08:19: %PIX-4-405001: Received ARP request collision from 10.40.144.2/0011.43e1.c5d5 on interface in...
Hi all,I work with a Cisco PIX 515E UR with 3 interfaces : Inside, DMZ and Outside.In the DMZ, I have a SMTP Server.I want first that any host on the outside can reach this server on the port 25.I think using NAT:static(dmz,outside) global_addr,local...
Hi all,I want to establish a VPN tunnel between 2 PIX515E, a site-to-site VPN.I have used the wizard of the PDM.First, the tunnel seems ok : I can ping hosts on remote site, telnet, etc.But sometimes, the tunnel seems to be down: I cannot ping remote...
It does make sense.If I can't chose the interface as the nat address, and I have to choose another one in the LAN range (in your example, 192.168.10.1), how are the flows being routed to the Firewall? With the Proxy-ARP activated on the LAN interface...
Hello Jennifer,It's actually the second case: I want to NAT both:the destination address (before NAT, it's the IP address of the LAN interface of the FW - 192.168.10.254 / after NAT, it's the address 15.10.10.254)the source address (before NAT, it's ...
Hello hdashnau,It's not for VPN connections but for all trafic from one local zone to another.I'm still looking for a way to do that, with ACS or NAC, but i can't find any documentation on it.Did someone already face this issue?Many thanks,Regards
Hello,ACS seems to be a good way. However, I can't find any information about authenticating trafic users on ASA with ACS. I only saw documentation on how secure access on the firewall with ACS, but nothing about authenticating users when they are tr...
