About jpodo

jpodo · 10-25-2019

I am trying to authenticate SSH connections via RADIUS, but I cannot get my ASA to connect to the RADIUS server (AD DC w/ NPS) despite the fact that the server is local to the inside interface. The ASA IP is 10.10.10.1 and the RADIUS server IP is 10...

jpodo · 10-28-2019

The RADIUS server/DC is a Windows Server 2019 VM, and apparently this is a known bug with Server 2019 that blocks the traffic despite local firewall rules allowing it. F****** Microsoft. I had to add a duplicate rule just for RADIUS traffic and not ...

jpodo · 10-27-2019

Here's a debug and RADIUS test. asa01# debug radius asa01# test aaa-server auth RAD_SERVERS host 10.10.10.100 username *** password *** INFO: Attempting Authentication test to IP address (10.10.10.100) (timeout: 12 seconds) radius mkreq: 0x80000004 a...

jpodo · 10-27-2019

It isn't simulating traffic going to the ASA. It's simulating traffic originating from the ASA. If I change the source IP to a host on my inside network and run packet-trace, it is allowed. The problem is that the actual RADIUS client is the ASA i...

Member Since	‎10-25-2019 10:47 PM
Date Last Visited	‎11-08-2019 12:03 AM
Posts	4

User Statistics

User Activity

ASA 5506 cannot connect to RADIUS server on inside subnet

Re: ASA 5506 cannot connect to RADIUS server on inside subnet

Re: ASA 5506 cannot connect to RADIUS server on inside subnet

Re: ASA 5506 cannot connect to RADIUS server on inside subnet