Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Although I am still not entirely sure that our Dynamic PAT is the root of the problem, it seems prudent to explore changing this toa static value. I have changed this to a static object, and we seem to still have outside connectivity, which is great...
We have currently set up our remote access VPN clients to use the AnyConnect client (eventually we would rather use IPSec, but that's for another post, most likely). Most documentation shows setting up the VPN NAT pool on a different subnet, so we c...
I noticed that since going live, our Kaseya server is unable to get out to update itself. After doing some troubleshooting, I'm thinking that the problem is likely because we have our dynamic PAT rule in place for web surfing. Since the updates nee...
I have noticed using ASDM 6.3 that ACL's seem to show up in different places. At the top of the menu under "Firewall" is where I have created some. Theyseem to often disappear and show up under "ACL Manager" which is farther down under the Advanced...
I have been working with another agency to set up a site to site VPN. During the course of this, we have run into several areaswhere I fail to understand what they are saying. I have never done this before, but some of what they are saying is chal...
oh, I hadn't been pushing the "get capture buffer". I've also been running wireshark, but interestingly it does not show me much traffic at all when I make these requests. I'm not entirely sure what I am looking for this way, though. It does menti...
That's interesting, thanks!That's part of the question about whether or not it needs to be the same port both as source and as dest for teh program to work correctly (I have yet to get a response from them about this)I have not been able to get anyt...
My understanding of dynamic PAT is that is still uses whatever ip address you selected (the external interface in this case)but it connects using a variable port. My concern in this case is that I have a specific update that is not taking place, and...
I will need to contact Kaseya and see if both ports need to be the same. I'm kind of thinking that that is going to be the case, since nothing else I have tried has worked. Is there anyway to do a PAT exception so that it does not get given a dynam...
I have a fairly open rule to test with that is an any, any port 5721 rule in place. Right now it has 4 hits on it....so I'm not sure what that means. When I run the "get update" thing, the count does not increase. So, not exactly sure where those...
