Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,maybe the title is not very clear, but I'll try to describe my problem here.Currently we have a PIX 515e as our entry point. Our ISP give us an ethernet link that we plug in the Ethernet 0 port. In the Ethernet 1 port we plug a cable to our swi...
Hi,I am trying to configure our ASA 5510. For now we just want to replace our old PIX with the ASA, security will come later.This is why I just want to allow everything to go through the ASA.We use two interfaces on the ASA, 0 is the outside interfac...
Thanks, but that's not my problem after all. I clear all arp caches, it didn't work.My problem now is something else, I got a lot of frame drops because of "No route to host", which is really strange.But that's another topic.
Thanks for the answer, I didn't thought of the ARP entries problem. The broken connections are not a problem.Well I think I'm going to try and change the arp cache timeout on the servers, to something like 5s.If I understand your post correctly after...
What do you mean by that? By default communication from inside to
outside is permitted because you're going from a high security level to a
lower oneand furthermore if the os is recent you don't even need to nat to communicate.Well, I didn't change...
