Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I have two sites each with a pix and a mail server site A Pix is 515E 7.0(2) site B Pix is 515E 7.2(2)need to configure both to send outbound smtp traffic originating from the mail server through a specific IP so I had added the followingacc...
well here you go,show cap capin5 packets captured 1: 07:43:25.154471 192.168.2.10.62613 > 212.x.x.15.25: S 3863406231:3863406231(0) win 65535 2: 07:43:25.233432 212.x.x4.15.25 > 192.168.2.10.62613: S 2814343360:2814343360(0) ack 3863406232 win 5...
I can't access the pix right now, will replay tomorrow thank you very much for your great helpand I really need your help in how to rate the postthanksregards,
here you goPhase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information:MAC Access listPhase: 2Type: FLOW-LOOKUPSubtype:Result: ALLOWConfig:Additional Information:Found no matching flow, creating a new flowPhase: 3Type: RO...
Hi jcavaja,the configuration of the two pix's are identical except for the outgoing IP, see I had copied the configuration from the 7.0(2) to the 7.2(2) in the 7.2(2) it matches the access-list inside_pnat_outbound extended permit tcp host 192.168.2....
Hi jcavaja,no the traffic will be originating form the mail server 192.168.2.10 to the outside world.but why its working ok on 7.2(2) the problem only appears on 7.0(2) Regards,