Hi there,
I have two sites each with a pix and a mail server site A Pix is 515E 7.0(2) site B Pix is 515E 7.2(2)
need to configure both to send outbound smtp traffic originating from the mail server through a specific IP so I had added the following
access-list inside_pnat_outbound extended permit tcp host 192.168.2.10 any eq smtp
global (Outside) 6 10.xx.xx.41
nat (inside) 6 access-list inside_pnat_outbound
static (inside,Outside) tcp 10.xx.xx.42 ftp 192.168.2.10 ftp netmask 255.255.255.255
static (inside,Outside) tcp 10.xx.xx.43 www 192.168.2.10 www netmask 255.255.255.255
this is working great on Pix 7.2(2) but in 7.0(2) traffic is going out from 10.xx.xx.42
how can I reslove the issue and restrict outbound smtp traffic through specific IP
