About richardljohnson231

richardljohnson231 · 01-24-2020

Okay, this is my first time here. I am setting up a home lab. Router(2921) to a layer 3 switch(3560) to an ASA(5520). The router to layer 3 switch works fine. On the switch I have 2 vlans setup (vlan 1 10.4.0.1/24, vlan 2 10.3.0.1/24) connected direc...

richardljohnson231 · 01-24-2020

FINALLY!!!!!!!!!! THANK YOU!!!!

richardljohnson231 · 01-24-2020

routes were removed and attempted to ping 10.2.0.2 (100% loss) ASA show routeGateway of last resort is 10.2.0.2 to network 0.0.0.0C 10.4.0.0 255.255.255.0 is directly connected, outsideS* 0.0.0.0 0.0.0.0 [1/0] via 10.2.0.2, outside

richardljohnson231 · 01-24-2020

Those routes were removed. I received this from the debug. ciscoasa(config)# ICMP echo request from 10.2.0.1 to 10.4.0.2 ID=3 seq=0 len=72ICMP echo request from 10.2.0.1 to 10.4.0.2 ID=3 seq=1 len=72ICMP echo request from 10.2.0.1 to 10.4.0.2 ID=3 se...

richardljohnson231 · 01-24-2020

Yes, It is enabled. From the switch i can ping the 10.4.0.2 (outside interface of the ASA) however, from the ASA I am unable to reach any IP.

richardljohnson231 · 01-24-2020

Correct, the (Fa2/0/1) is plugged into the router. From the router I can ping the 10.4.0.1 address but not 10.4.0.2(outside interface of the ASA) Router config Current configuration : 1526 bytes!! Last configuration change at 16:54:12 UTC Fri Jan 24 ...

Member Since	‎01-24-2020 11:10 AM
Date Last Visited	‎01-31-2020 05:33 AM
Posts	7

User Statistics

User Activity

Unable to ping from ASA 5520 to outside

Re: Unable to ping from ASA 5520 to outside

Re: Unable to ping from ASA 5520 to outside

Re: Unable to ping from ASA 5520 to outside

Re: Unable to ping from ASA 5520 to outside

Re: Unable to ping from ASA 5520 to outside