Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,we have new 2 65009 E-series switches and was planned to Vlan implementation,DHCP,HSRP (redudancy for Vlan).both the Switches are running IOS System image file is "sup-bootdisk:s72033-ipbasek9-vz.122-33.SXH4.bin".Earlier network was confiogure...
Hi,From the output pasted i do not see high utilization on Proc cpu max is 1.28%from the history i would see Traffic is too high.As per my knowledge i would suspect that Router 3845 can handle upto 40-42 Mbps max if you are utilization DS3(45mbps)wit...
Can you Post the LAN Diagram with ip address mentioned here and also the sh run on the uplink port on all the switches + sh run of the interface from all the switches ( one specific port that is having problem)
if the router can reach the firewall but not the clients the reason could be as follows1) check the sunet mask for the interface and you can reach only from the particular subnet and not with other subnet.2) try adding a route for that subnet, if not...
