思科AIR-AP1815W 无法访问Web管理页面

[CISOvO]

1.四台AIR-AP1815W的AP其中一台刷了Mobility Express做为控制器管理其他三台AP全部配置好了之后第一天可以正常使用浏览器访问控制器的Web管理界面 过了一天之后控制器的Web就无法访问了 但是通过SSH可以正常访问Mobility Express控制器的后台，是控制器关闭了http访问吗？

请问这要怎么处理各位大神们

下面是查看的一些命令和图片

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.10.196.0
OUI File Last Update Time........................ N/A

System Name...................................... ME-WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2489
IP Address....................................... 192.168.1.254
Last Reset....................................... 1: reload command

System Up Time................................... 3 days 23 hrs 51 mins 2 secs
System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... J4 - Japan 4(PQ)

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled

--More-- or (q)uit
Number of WLANs.................................. 2
Number of Active Clients......................... 14

OUI Classification Failure Count................. 288

Memory Current Usage............................. 59
Memory Average Usage............................. 59
CPU Current Usage................................ 5
CPU Average Usage................................ 3

Flash Type....................................... Compact Flash Card
Flash Size....................................... 1073741824

Burned-in MAC Address............................ 70:69:5A:F1:E1:E0
Maximum number of APs supported.................. 50
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2
(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Ver

——————————————第二个————————————-

(Cisco Controller) >show network summary

RF-Network Name............................. ME-WLC
DNS Server IP1.............................. 192.168.1.1
DNS Server IP2.............................. 208.67.222.222
DNS Server IP3.............................. 208.67.220.220
Web Mode.................................... Disable
Secure Web Mode............................. Enable
HSTS Mode................................... Disable
Secure Web Mode Cipher-Option High.......... Enable
Secure Web Mode SSL Protocol................ Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Network 2-factor-authentcation.............. Disable
2FA Username field ..................... Common Name
Secure Shell (ssh).......................... Enable
Secure Shell (ssh) Cipher-Option High....... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
IPv4 AP Multicast/Broadcast Mode............ Multicast Address : 0.0.0.0
IPv6 AP Multicast/Broadcast Mode............ Multicast Address : ::
IGMP snooping............................... Disabled

--More-- or (q)uit
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
Mesh Backhaul RRM...........

  

 

 

 

 

 

 

[sufee]

学习！！！升级到8.10.196怎么不断重启，甚至通电不开机

[Rps-Cheers · Accepted solution]

看配置来说，WEB只是开启了HTTPS，没有开启HTTP。如果SSH可以登录的话，说明连通性应该是没有问题的。

Web Mode.................................... Disable
Secure Web Mode............................. Enable

注意访问的时候，是否是https://x.x.x.x，如果不是的话，可以修改一下，或者开启HTTP访问看看。

此外就是浏览器是否有更换过，可以换换浏览器试一下。

[sufee]

Air-AP1815W-H固件激活版本8.5.185.0，备份版本8.10.190.0，机器启动后进入Mobility Express模式，时间10s后就重启

(Cisco Controller)

Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)

User:

Writing reload timestamp (Sat Apr 12 11:24:44 UTC 2025) to disk

[04/12/2025 11:24:46.5756] UBIFS: un-mount UBI device 0, volume 3
[04/12/2025 11:24:46.6256] UBIFS: background thread "ubifs_bgt0_3" stops
[04/12/2025 11:24:47.4556] reboot: Restart

[sufee]

固件升级到8.10.196.0总是重启

Starting the Switchdriver...
Starting Switchdriver...

Cryptographic library self-test....
Testing SHA1 Short Message 1
Testing SHA256 Short Message 1
Testing SHA384 Short Message 1
SHA1 POST PASSED
Testing HMAC SHA1 Short Message 1
Testing HMAC SHA2 Short Message 1
Testing HMAC SHA384 Short Message 1
passed!

XML config selected
Starting SSHD: ok
Starting Redis-Server: ok
Starting naconnector: ok
Starting nginx: ok
Starting NA Connector...
Validating XML configuration
creating logs dir
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.

Cisco AireOS Version 8.10.196.0
Initializing OS Services: Starting DB Services...
ok
Initializing Serial Services: ok
Initializing Network Services: ok
Starting PNP: ok
Starting Statistics Service: ok
Unable to open dx flag file
Starting ARP Services: ok
Starting Trap Manager: ok

Starting Data Externalization services: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting SNMP services: ok
Starting Fastpath Hardware Acceleration: Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: PnP config is saved to storage
ok
Starting Client Troubleshooting Service: ok
Starting Certificate Database: Initializing Curl Globally..
ok
Starting VPN Services: ok
Starting Management Frame Protection: ok
Starting DNS Services: ok
Starting Secure Tunnelling Services: ok
ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting LOCP: ok
Starting Security Services: ok
Starting OpenDNS Services: ok
Starting Policy Manager: ok
Stopping DHCPv6 client...
Stopping Cisco brain service...
[ OK ] ReStarting Authentication Engine:
SIGHUP handler received signal 1
si_signo: 1, si_errno: 0, si_code: 128, si_addr: 0x0
Stopping Serial Getty on ttyS0...
Stopping Cisco printkd...
Stopping Hostapd process...
Stopping Cisco led service...
Stopping OpenSSH server daemon[04/13/2025 13:42:43.0199] audit_printk_skb: 63 callbacks suppressed
...
Stopping AP Trace daemon...
[ OK ] Stopped Cisco kexec.
Stopping Cisco kexec...
Stopping NTP_PROC daemon...
Stopping Cisco rtd service...
[ OK ] Stopped target Timers.
Stopping capwapd...
Stopping gRPC server daemon...
Stopping DNSmasq...
[ OK ] Stopped Cisco klogd.
[ OK ] Stopped Cisco led service.
[ OK ] Stopped System Monitor service.
[ OK ] Stopped NTP_PROC daemon.
[ OK ] Stopped Cisco printkd.
[ OK ] Stopped AP Trace daemon.
[ OK ] Stopped Fast CGI daemon.
[ OK ] Stopped Cisco rtd service.
[ OK ] Stopped Cisco brain service.
[ OK ] Stopped OpenSSH server daemon.
[ OK ] Stopped Clean Air daemon.
[ OK ] Stopped DNSmasq.
[ OK ] Stopped DHCPv6 client.
[ OK ] Stopped DNSmasq for host.
[ OK ] Stopped capwapd.
[ OK ] Stopped AP process failure for .
[ OK ] Stopped Hostapd process.
[ OK ] Stopped target sshd-keygen.target.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Removed slice system-serial\x2dgetty.slice.
[ OK ] Stopped gRPC server daemon.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Slices.
[ OK ] Stopped target Sockets.
[ OK ] Stopped target Paths.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped Cisco ME service.
Stopping Cisco ME service...
Stopping rsyslog client...
Stopping Security Auditing Service...
[ OK ] Stopped Cisco S16platfomm.
Stopping Cisco S16platfomm...
Stopping Cisco system time saving...
[ OK ] Stopped Cisco Tam service.
Stopping Cisco Tam service...
[ OK ] Stopped Cisco act2 check.
Stopping Cisco act2 check...
Stopping Cisco nolan service...
[ OK ] Stopped Cisco certtime service.
Stopping Cisco certtime service...
[ OK ] Stopped Cisco certificate create service.
Stopping Cisco certificate create service...
Stopping Cisco synclogd...
Stopping Cisco watchdog...
[ OK ] Stopped Security Auditing Service.
[ OK ] Stopped Cisco watchdog.
[ OK ] Stopped rsyslog client.
[ OK ] Stopped Cisco system time saving.
[ OK ] Stopped Cisco nolan service.
[ OK ] Stopped Cisco synclogd.
Stopping Cisco syslog service...
[ OK ] Stopped Cisco syslog service.
[ OK ] Stopped Cisco Kclick.
Stopping Cisco Kclick...
[ OK ] Stopped Cisco S15platform.
Stopping Cisco S15platform...
[ OK ] Stopped Cisco Kclick.
Stopping Cisco Kclick...
[ OK ] Stopped Cisco pkg install service.
Stopping Cisco pkg install service...
[ OK ] Stopped Cisco nss service.
Stopping Cisco nss service...
Stopping Cisco S10 boot service...
[ OK ] Stopped Cisco S10 boot service.
[ OK ] Stopped target Local File Systems.
Unmounting /sys/kernel/debug...
[ OK ] Stopped Cisco system time setup.
Stopping Cisco system time setup...
[ OK ] Stopped Cisco fips check.
Stopping Cisco fips check...
Unmounting /tmp/var/run/netns...
Unmounting /storage...
[ OK ] Stopped Cisco platform file generation.
Stopping Cisco platform file generation...
Stopping Cisco seed generation...
Unmounting /storage2...
Unmounting /click...
Unmounting /pstore...
[ OK ] Failed unmounting /tmp/var/run/netns.
[ OK ] Failed unmounting /storage.
[ OK ] Stopped Cisco seed generation.
[ OK ] Failed unmounting /click.
Unmounting /tmp...
[ OK ] Unmounted /sys/kernel/debug.
[ OK ] Failed unmounting /tmp.
[ OK ] Unmounted /pstore.
[ OK ] Unmounted /storage2.
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped target Local File Systems (Pre).
[ OK ] Stopped target Cisco File Systems (Pre).
[ OK ] Stopped Cisco early mount.
Stopping Cisco early mount...
[ OK ] Stopped Cisco UBIFS reformat/mount.
Stopping Cisco UBIFS reformat/mount...
[ OK ] Removed slice system.slice.
[ OK ] Removed slice -.slice.
[ OK ] Reached target Shutdown.
[04/13/2025 13:42:57.9399] audit_printk_skb: 54 callbacks suppressed
[04/13/2025 13:42:58.0599] reboot: Restart
Board type: AP1815W
smem ram ptable found: ver: 1 len: 3

U-Boot 2012.07 (btldr release 56) (Jul 25 2023 - 15:43:25)

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

DRAM: 1022 MiB
Nand: Detected ONFI Winbond NAND 256MiB 3,3V 8-bit
NAND ECC=1 ECC_THRESHOLD(NAND ECC-1)=0
SF: Detected MX25L3205D with page size 4 KiB, total 4 MiB
MFG data loaded
Scanning shenv data blocks
Total valid parts=4
Active shenv part[1:1], write_counter=36
machid: 8010001
Net: MAC0 addr:4:5f:b9:79:9b:90
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
Specified BOOT: part2

Booting from part2

Read 1024 bytes from volume part2 to 88000000
Read 62976348 bytes from volume part2 to 88000000
Signature returns 0
Image signing verification success, continue to run...
bootm 0x88000400
## Booting kernel from Legacy Image at 88000400 ...
## Loading init Ramdisk from multi component Legacy Image at 88000400 ...
## Flattened Device Tree from multi component Image at 88000400
Booting using the fdt at 0x8bc05744
Loading Ramdisk to 9c5f4000, end 9ffff1a3 ... OK
Loading Device Tree to 9c5e7000, end 9c5f3217 ... OK
no such devi
Board type: AP
Board type: AP1815W
smem ram ptable found: ver: 1 len: 3

[sufee]

(Cisco Controller) >show network summary

RF-Network Name............................. Cisco_d6:1e:60
DNS Server IP1.............................. 192.168.1.1
DNS Server IP2.............................. 192.168.1.1
DNS Server IP3.............................. 208.67.222.222
DNS Server IP4.............................. 208.67.220.220
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode SSL Protocol................ Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Secure Shell (ssh) Cipher-Option High....... Disable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
IPv4 AP Multicast/Broadcast Mode............ Multicast Address : 0.0.0.0
IPv6 AP Multicast/Broadcast Mode............ Multicast Address : ::
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds

可以访问不能登录，是不是Secure Web Mode Cipher-Option High要启用？