无线AP一直重启无法注册到控制器

[liushanshan633]

有部分AP一直重启，无法注册到控制器上。AP到控制器地址可达，在AP上指定了控制器的地址。控制器忽略了AP的证书。
哪位大佬可以分析一下，谢谢!
[*02/25/2016 11:17:51.1737] Did not get log server settings from DHCP.
[*02/25/2016 11:17:51.1937] Could Not resolve CISCO-CAPWAP-CONTROLLER
[*02/25/2016 11:17:51.1937] Discovery Request sent to 192.168.253.100 with discovery type set to 1
[*02/25/2016 11:17:51.1937]
[*02/25/2016 11:17:51.1937] SENDING DISCOVERY REQUEST wtpStartAcDiscovery:1430, Controller SYSTEC-WLC01: IP Address 192.168.253.100
[*02/25/2016 11:17:51.1937] Discovery Request sent to 255.255.255.255 with discovery type set to 0
[*02/25/2016 11:17:51.2037] Discovery Response from 192.168.253.100
[*02/25/2016 11:17:51.2037] Discovery response from MWAR ''running version 0.0.0.0 is rejected.
[*02/25/2016 11:17:51.2037] Failed to decode discovery response.
[*02/25/2016 11:17:51.2037] CAPWAP SM handler: Failed to process message type 2 state 2.
[*02/25/2016 11:17:51.2037] Failed to handle capwap control message from controller - status 4
[*02/25/2016 11:17:51.2037] Failed to process unencrypted capwap packet from 192.168.253.100
[*02/25/2016 11:17:51.2037] Failed to send capwap message 0 to the state machine. Packet already freed.
[*02/25/2016 11:17:51.2037] wtpProcessPacketFromSocket returned 4
[*02/25/2016 11:18:00.6707] Could not discover any MWAR.
[*02/25/2016 11:18:00.6707] Starting Discovery.
[*02/25/2016 11:18:00.6707] CAPWAP State: Discovery.
[*02/25/2016 11:18:00.6707]
[*02/25/2016 11:18:00.6707] Did not get log server settings from DHCP.
[*02/25/2016 11:18:00.7107] Could Not resolve CISCO-CAPWAP-CONTROLLER
[*02/25/2016 11:18:00.7107] Discovery Request sent to 192.168.253.100 with discovery type set to 1
[*02/25/2016 11:18:00.7107]
[*02/25/2016 11:18:00.7107] SENDING DISCOVERY REQUEST wtpStartAcDiscovery:1430, Controller SYSTEC-WLC01: IP Address 192.168.253.100
[*02/25/2016 11:18:00.7107] Discovery Request sent to 255.255.255.255 with discovery type set to 0
[*02/25/2016 11:18:00.7207] Discovery Response from 192.168.253.100
[*02/25/2016 11:18:00.7207] Discovery response from MWAR ''running version 0.0.0.0 is rejected.
[*02/25/2016 11:18:00.7207] Failed to decode discovery response.
[*02/25/2016 11:18:00.7207] CAPWAP SM handler: Failed to process message type 2 state 2.
[*02/25/2016 11:18:00.7207] Failed to handle capwap control message from controller - status 4
[*02/25/2016 11:18:00.7207] Failed to process unencrypted capwap packet from 192.168.253.100
[*02/25/2016 11:18:00.7207] Failed to send capwap message 0 to the state machine. Packet already freed.
[*02/25/2016 11:18:00.7207] wtpProcessPacketFromSocket returned 4
[*02/25/2016 11:18:10.1878] Could not discover any MWAR.
[*02/25/2016 11:18:10.1878] Starting Discovery.
[*02/25/2016 11:18:10.1878] CAPWAP State: Discovery.

[L3511604172]

如果你用的是1500系列的AP，应该是遇到bug了，
Cisco 1562-I AP failed to decode discovery response and unexpectedly reloads
CSCvh85082
Description
Symptom:
Discovery response from MWAR ''running version 0.0.0.0 is rejected.
Failed to decode discovery response.
CAPWAP SM handler: Failed to process message type 2 state 2.
Failed to handle capwap control message from controller - status 4
Conditions:
cisco AIR-AP1562E-I-K9
Processor board ID FGL2145B0YC
AP Running Image : 8.6.101.0
Primary Boot Image : 8.6.101.0
Backup Boot Image : 8.5.110.0

[L3511604172]

如果方便的话，建议升级下AP或者WLC版本试试

[liushanshan633]

L3511604172 发表于 2019-4-2 16:16
如果你用的是1500系列的AP，应该是遇到bug了，
Cisco 1562-I AP failed to decode discovery response and ...

1832i的，版本升级不了。因为无法设置AP的地址。如下：
#capwap ap ip 192.168.11.11 255.255.255.0 192.168.11.1
Capwap process not ready yet. Try after few moments.
CAPWAP socket is not ready, save static IP addr to config file.
等待一段时间后设备会自动重启，并报如下错误：
[*02/19/2016 04:00:16.6670]
[*02/19/2016 04:00:17.5267] /usr/sbin/capwapd: opening /click/wdog_helper/ap_monproc_capwapd failed!: No such file or directory
[*02/19/2016 04:00:17.6667] /usr/sbin/capwapd: reading file /click/srcr2/gw/is_gateway: No such file or directory
[*02/19/2016 04:00:18.6664] /usr/sbin/capwapd: reading file /click/srcr2/gw/is_gateway: No such file or directory
[*02/19/2016 04:00:19.6660] /usr/sbin/capwapd: reading file /click/srcr2/gw/is_gateway: No such file or directory
[*02/19/2016 04:00:20.6657] /usr/sbin/capwapd: reading file /click/srcr2/gw/is_gateway: No such file or directory
[*02/19/2016 04:00:21.6654] /usr/sbin/capwapd: reading file /click/srcr2/gw/is_gateway: No such file or directory
[*02/19/2016 04:00:21.6654] waiting for uplink IP address and reachable default gateway

[liushanshan633]

L3511604172 发表于 2019-4-2 16:19
如果方便的话，建议升级下AP或者WLC版本试试

试了，无法进行升级。AP无法设置IP。

[Rps-Cheers]

确认软件和硬件支持。可以尝试一下：
1、通过GUI来添加AP的MAC地址：Security>AAA>AP Policies
2、

直接console到AP的CLI界面，然后输入

capwap ap mode local

[liushanshan633]

1540488497lcj 发表于 2019-4-2 22:35
确认软件和硬件支持。可以尝试一下：
1、通过GUI来添加AP的MAC地址：Security>AAA>AP Policies

添加了，还是不行。有可能是bug。不过我现在的控制器命中了bug版本，还不能升级测试。

[一只]

可以查看下此型号的wlc和此型号的ap的兼容性，有些不兼容的，是会出现这样的情况

[L3511604172]

liushanshan 发表于 2019-4-2 16:31
试了，无法进行升级。AP无法设置IP。

瘦ap配置地址方法如下：
AP2F-3502-1# lwapp ap ip address 10.18.65.3 255.255.255.0
AP2F-3502-1# lwapp ap controller ip address 10.18.65.254
AP2F-3502-1# lwapp ap ip default-gateway 10.18.65.1

[Wubin2010]

使用lwapp的话注意管理地址要和wlc在同一网段

[18653465190]

跟着咸鱼在翻身的路上学习一下。

[zourenqiang]

请问现在这个bug有解决办法么？

[yanyan]

开过TAC回复：The radio is damaged, RMA is required.

[Jiezhu1129]

MAC过滤下去就应该可以了 但是不是在AAA的地方，遇到过好几次

[sn270043685]

AP已经 坏了，我们有很多这样的坏件，拿去RMA吧