可以先看看此时的干扰、信道利用率等情况如何。尤其是早上,是不是有微波炉之类的电器在使用?
WLC上可以通过show ap auto-rf 802.11a/802.11b <ap-name> 查看
示例:
(Cisco Controller) >show ap auto-rf 802.11a Rps-mkap01
Number Of Slots.................................. 2
AP Name.......................................... Rps-mkap01
...
Interference Information <<<<<<<<<<<<<<<<<<<<<<<
Interference Profile......................... PASSED
Channel 36................................... -128 dBm @ 0 % busy
Channel 40................................... -128 dBm @ 0 % busy
Channel 44................................... -128 dBm @ 0 % busy
Channel 48................................... -128 dBm @ 0 % busy
Channel 52................................... -128 dBm @ 0 % busy
...
Load Information
Load Profile................................. PASSED
Receive Utilization.......................... 0 %
Transmit Utilization......................... 0 %
Channel Utilization.......................... 0 % <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Attached Clients............................. 1 clients
...
Client Signal Strengths
RSSI -100 dbm................................ 0 clients
RSSI -92 dbm................................ 0 clients
...
Client Signal To Noise Ratios
SNR 0 dB.................................. 0 clients
SNR 5 dB.................................. 0 clients
SNR 10 dB.................................. 0 clients
...
另外再WLC和AP上检查一下是否有异常的log:
WLC :show msglog、show traplog
AP : show logg
如果AP无法console,可以通过如下方式开始AP远程接入方式:
config ap mgmtuser add username user password password enablesecret enable_password all
config ap ssh enable all
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !