AP1815W刷了AIR-AP1815-K9-ME-8-10-151-0.tar包，配置完Cisco Mobility Express，Web登录没有AP，怎么解决？
[*12/26/2021 20:10:03.3757] === 5G radio domain is 46, COPY 5G BDF files from non_ETSI_BDF folder ===
[*12/26/2021 20:10:03.4309] /etc/init.d/S10boot: Warning: deleting backup ap images to save storage...
[*12/26/2021 20:10:03.4656] 1
[*12/26/2021 20:10:03.7438] Active version: 8.10.151.0
[*12/26/2021 20:10:03.7523] Backup version: 17.4.1.6
[*12/26/2021 20:10:04.1262]
[*12/26/2021 20:10:04.1262] led pattern module start
[*12/26/2021 20:10:04.1846] Loading caldata from mtd2
[*12/26/2021 20:10:04.8698] ess-switch DT exist!
[*12/26/2021 20:10:04.8699] switchreg_base_addr: 0xc000000
[*12/26/2021 20:10:04.8699] switchreg_size: 0x80000
[*12/26/2021 20:10:04.8699] switch_access_mode: local bus
[*12/26/2021 20:10:04.8699] wan bmp:0x20
[*12/26/2021 20:10:04.8700] ess-psgmii DT exist!
Starting nginx: ok
Starting NA Connector...
Validating XML configuration
creating logs dir
Starting DB Services...
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 8.10.151.0
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Starting Statistics Service: ok
(Cisco Controller) >show ap summary
Number of APs.................................... 0
Global AP User Name.............................. AP
Global AP Dot1x User Name........................ Not Configured
Global AP Dot1x EAP Method....................... EAP-FAST
* prefix indicates Cisco Internal AP
(Cisco Controller) >
(Cisco Controller) >apciscoshell
!!Warning!!: You are entering ap shell. This will stop you from establishing new telnet/SSH/Web sessions to controller.
Also the exsisting sessions will be suspended till you exit the ap shell.
To exit the ap shell, use 'logout'[*12/27/2021 04:53:05.4779] Re-Tx Count=4, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:05.4780]
User Access Verification
Username: [*12/27/2021 04:53:08.3292] Re-Tx Count=5, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:08.3292]
[*12/27/2021 04:53:11.1804] Max retransmission count exceeded, going back to DISCOVER mode.
[*12/27/2021 04:53:11.1805] Dropping msg CAPWAP_CONFIGURATION_STATUS, type = 4, len = 2200, eleLen = 2208, sendSeqNum = 1
[*12/27/2021 04:53:11.2432]
[*12/27/2021 04:53:11.2432] CAPWAP State: DTLS Teardown
[*12/27/2021 04:53:11.4680] Script called with args:[ABORT]
[*12/27/2021 04:53:11.5689] do ABORT, part1 is active part
[*12/27/2021 04:53:11.6426] Cleanup tmp files ...
[*12/27/2021 04:53:26.0187] Discovery Request sent to FlexME 10.32.x.xx
[*12/27/2021 04:53:26.0303] Discovery Request sent to FlexME ::
[*12/27/2021 04:53:26.0321] Discovery Response from 10.32.x.xx
[*12/27/2021 04:53:35.5134]
[*12/27/2021 04:53:35.5134] CAPWAP State: DTLS Setup
[*12/27/2021 04:53:35.7692]
[*12/27/2021 04:53:35.7692] CAPWAP State: Join
[*12/27/2021 04:53:35.8364] Sending Join request to 10.32.x.xx through port 5272
[*12/27/2021 04:53:35.8459] Join Response from 10.32.x.xx
[*12/27/2021 04:53:35.8460] AC accepted join request with result code: 0
[*12/27/2021 04:53:35.8461] Received wlcType 1, timer 120
[*12/27/2021 04:53:35.9816]
[*12/27/2021 04:53:35.9816] CAPWAP State: Image Data
[*12/27/2021 04:53:35.9835] AP image version 8.10.151.0 backup 17.4.1.6, Controller 8.10.151.0
[*12/27/2021 04:53:35.9837] Version is the same, do not need update.
[*12/27/2021 04:53:36.0843] Script called with args:[NO_UPGRADE]
[*12/27/2021 04:53:36.1824] do NO_UPGRADE, part1 is active part
[*12/27/2021 04:53:36.1854]
[*12/27/2021 04:53:36.1855] CAPWAP State: Configure
[*12/27/2021 04:53:39.3123] Re-Tx Count=1, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:39.3123]
[*12/27/2021 04:53:42.1634] Re-Tx Count=2, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:42.1634]
[*12/27/2021 04:53:45.0150] Re-Tx Count=3, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:45.0150]
[*12/27/2021 04:53:47.8658] Re-Tx Count=4, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:47.8658]
[*12/27/2021 04:53:50.7176] Re-Tx Count=5, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*12/27/2021 04:53:50.7176]
[*12/27/2021 04:53:53.5688] Max retransmission count exceeded, going back to DISCOVER mode.
[*12/27/2021 04:53:53.5689] Dropping msg CAPWAP_CONFIGURATION_STATUS, type = 4, len = 2200, eleLen = 2208, sendSeqNum = 1
[*12/27/2021 04:53:53.6326]
[*12/27/2021 04:53:53.6326] CAPWAP State: DTLS Teardown
[*12/27/2021 04:53:53.8594] Script called with args:[ABORT]
[*12/27/2021 04:53:53.9579] do ABORT, part1 is active part
[*12/27/2021 04:53:54.0292] Cleanup tmp files ...
