EVE官网的文档楼主可以参考一下
HowTo add Cisco vWLC (Virtual Wireless LAN Controller)
https://www.eve-ng.net/documentation/howto-s/70-howto-add-cisco-vwlc-virtual-wireless-lan-controllerSteps How to create vWLC.Step 1. Download vWLC MFG_CTVM_8_7_102_0.iso installation image.
Step 2. SSH to your EVE and create new image directory for your vWLC
mkdir
/opt/unetlab/addons/qemu/vwlc-8.7.102
Step 3. Using WinSCP or FileZilla upload MFG_CTVM_8_7_102_0.iso image into created directory.
Step 4. From EVE cli, go to created vWLC directory
cd /opt/unetlab/addons/qemu/vwlc-8.7.102
Step 5. Rename original ISO file to cdrom.iso
mv MFG_CTVM_8_7_102_0.iso cdrom.iso
Step 6. Create HDD for your vWLC
/opt/qemu/bin/qemu-img create -f qcow2 megasasa.qcow2 8G
Step 7. Create new lab in the EVE and add new vWLC on the topology.
Step 8. Start vWLC.
NOTE: after you started vWLC and open console it will look like nothing is happening, patience and wait (5-10mins) till on your vWLC telnet session will appear
Step 9. Now you can stop vWLC and prepare default image for your EVE
Step 10. On EVE LAB web UI left side bar choose “Lab Details” to get your lab uuid details: my case: UUID: 466028c6-3052-4895-a495-683201e576f7
IMPORTANT: Commit your installed image to be as default for further use in EVE-NG.
cd /opt/unetlab/tmp/0/466028c6-3052-4895-a495-683201e576f7/1/
qemu-img commit megasasa.qcow2
(0 is POD number of user, main admin user POD Nr. is 0)
Step 11. Remove cdrom.iso from/opt/unetlab/addons/qemu/vwlc-8.7.102 and fix permissions
cd /opt/unetlab/addons/qemu/vwlc-8.7.102/
rm -f cdrom.iso
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !
