Cisco HyperFlex vCenter 플러그인은 vSphere Web Client와 통합되며
모든 HX Data Platform 설치 후 관리 및 모니터링 기능을 지원합니다.
Cisco HyperFlex HTML5 Plugin Prerequisites
1. Cisco HyperFlex HTML5을 위한 버전 : vCenter 6.5U2 이상에서 Cisco HX 릴리스 4.0(2a) 이상
2. 브라우저 호환성: Chrome, Firefox 및 IE에서 작동
3. 사용자 및 역할을 관리하려면 관리 권한이 필요
4.5.(1a)와 4.5.(2a) 이후 버전 설치시 필요한 정보
HX Release 4.5(1a)
|
HX Release 4.5(2a) and later
|
vCenter Server FQDN/IP
|
HX Storage controller VM admin password
|
vCenter server Username and Password
|
vCenter Username & Password
|
HX Controller VM Password
|
-
|
Storage Controller VM root password
|
-
|
Storage Controller VM admin password
|
-
|
설치 방법
1. HyperFlex-VC-HTML-Plugin-2.1.0.zip 파일을 /tmp로 복사 ( sftp사용 )
admin:/tmp$ ls HyperFlex-VC-HTML-Plugin-2.1.0.zip
HyperFlex-VC-HTML-Plugin-2.1.0.zip
2. 압축 풀기
admin:/tmp$ unzip HyperFlex-VC-HTML-Plugin-2.1.0.zip
Archive: HyperFlex-VC-HTML-Plugin-2.1.0.zip
inflating: hx-html-plugin.zip
inflating: install_vc_plugin.py
inflating: readme.txt
3. 플러그인 설치
admin:/tmp$ python /tmp/install_vc_plugin.py
Initiating installation of Cisco HyperFlex vCenter plugin...
Enter vCenter FQDN/IP: 10.72.87.64
Enter administrator vCenter username: administrator@hx.com
Enter password for administrator@hx.com:
Enter storage controller root password: <- root PW는 admin PW와 동일한 PW를 사용하시면 됩니다.
Enter storage controller admin password:
Copying plugin to storage controller VMs...
Copying plugin to 192.168.0.221
Copying plugin to 192.168.0.223
Copying plugin to 192.168.0.222
Cisco HyperFlex vCenter Plugin version '2.1.0' is registered successfully with vCenter server 10.72.87.64
4. 확인
vCenter에 접속하여 Plugin이 정상으로 설치되었는지 확인 합니다.