Hi, I have a problem with slow ssh connection and slow command input on Nexus 9508(nx-os 10.2(1)F). "show system internal process cpu" vsh.bin has high cpu usage. Will a restart solve the problem? What is the restart command, and is there no traffic ...
포럼 게시물
Hi, my ucs b200 m5 blade server's dimm error again and again. I called TAC, they suggest replace dimm, cpu, motherboard. so i did all parts replacement. even also i did firmware update. but my b200 m5, still specific dimm error again.. someone know w...
Hello,Is there a way to check flap statistics for the mgmt0 port on an N9K switch? For N9K ASIC ports, I can use the show interface command to check the Last link flapped information, but it doesn’t seem to be available for the OOB mgmt0 port. I’d ap...
Hello, In a vPC environment, I would like to understand how the ip arp synchronize option functions.When this option is enabled, does ARP continuously synchronize via CFS in the same way that the MAC table does? Or is it the case that when a vPC unde...
Hello,I am currently testing the GIR (Graceful Insertion and Removal) feature on NX-OS. However, I’m having difficulty understanding the meaning of the maint-delay option.Specifically, I’m not sure what it means to "release" the CLI config. As I am n...
I have connected a Linux server by teaming on the Catalyst 9407. If the server down the active port, it will fail over normally, but if it's returned, the mac will come up from both interfaces connected to the 9407. Does anyone know what the problem ...
Hello, I’m currently researching EMI retrain behavior and adoption in ACI environments. From what I’ve observed, most ACI-based sites do not actively utilize this feature, which is why I'm turning to the community for insight. We are running: Applica...
Some older logs appear later than the most recent logs. When I do "show logging", the logs from later times are not shown, as shown below. model : N9K-C9504 nx-os : 10.4.4(M) ========================================================= C9504# show logg ...
Hi, i have customer have problem with fan speed. my customer`s opinion was fan should be more faster. The N9K-C93108TC-EX have 47C temperature and 70% fan speed, transceiver have 65C. The Other one have 27C temperature and 70% fan speed, transceiver...
Hello, the log below occurred in our customer's N9K equipment. 2025 Jan 5 09:53:40 [HOSTNAME] %KERN-3-SYSTEM_MSG: [51084151.422007] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen - kernel2025 Jan 5 09:53:40 [HOSTNAME] %KERN-3-...
Hello, Does anyone know about Slider rails Specifications in NXK-ACC-KIT-1RU?
Hi, I have a quick question.. does anyone know if N9K-C93108TC-EX all uplink (Eth1/49-54) ports are available as Breakout? Thank you.
Hello, I'm leaving a post on the community because of the questions below.If you run the cisco nexus 9000 series, you can see the following accounting log.Sat Oct 5 01:39:06 2024:type=start:id=vsh.bin.10027:user=admin:cmd=Sat Oct 5 01:39:06 2024:type...
Hello, I would like to check the functional/performance difference between LXC mode (booting mode for using enhanced ISSU) and normal mode in Nexus 9000 Series.For normal mode, NXOS works directly with hardware, but for LXC mode, I understood that ...
CiscoU에 Cisco Data Center Nexus Dashboard Essentials | DCNDE Learning Path 과정이 7월 9일까지까지 무료로 공개되었으니 이번 기회에 공짜로 Nexus Dashboard에 대해 배워 보세요 😉 참고로, 이 과정을 기간 내에 이수 하시면 자격증 갱신 포인트인 CE(Continuing Education) 26 크레딧도 제공된다고 합니다! Source: 🌟 Learn and earn 26 ...
