cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3862
Views
8
Helpful
4
Comments
tommount16
Community Member

We recently upgraded this community because the old network lacked a decent wifi signal throughout the building. The biggest challenge in this site was that we had two floors and we had to do some adjusting with the wifi due to bleed over from the other floor but installing MR 36 AP's really helped because they do most of the radio and power settings out of the box.

We used 3

32 MR 36 AP's

1 MX 80 Router

3 MS 225 Switches

10GB SFP's Meraki

40 GB Stacking cables

2 APC 1500RM2U UPS with Nic Cards

In the future we hope to install a second circuit and use the SD Wan and we will upgrade the MX to the MX84.

image.jpegIDFimage.jpegMDF

4 Comments
MerakiGnome
Meraki Community All-Star
Meraki Community All-Star

Excellent job. Loving the cabling.

The SD-WAN piece will be a nice addition. You may have a choice of MX's outside the current range when that project comes around....sssshhhh...you didn't hear me say that 😉

tommount16
Community Member

@DarrenOC Yes 1 agree the 1 TO 1 patching is a great way to do things! and to have something more in the MX would be great... maybe more Load control. Cheers

KRobert
Level 8
Level 8

Well done @tommount16 It looks great! Those 1ft cables to a patch panel definitely make cable management easier. I agree with @DarrenOC on waiting for the upgrade 😁

pavement
Level 5
Level 5

great job in the cable management

Welcome to the Project Gallery!

This is a place for Cisco customers and partners to share stories about their technology projects.

Use the comment section to ask a question, make a suggestion or just say well done. If you like a project, thank the author by clicking the Helpful button at the end of the post!

Did you complete a deployment recently? Share your great work with fellow community members! No project is too big or too small.