cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Packet Tracer Help

1059
Views
0
Helpful
5
Comments

Hello guys,

 

I am working on a personal project and am trying configure this small network on Packet Tracer. I attached a image of what the network looks like on packet tracer, I know the routers are disconnected. I am trying to get PC's on both sides to communicate. If someone can help me to configure the switches so they communicate properly id really appreciate it.

 

Thanks team,

Erik

Comments
Martin L
VIP Advocate

You need router or layer 3 switch to route traffic between 2 different networks; typically call inter-vlan routing.

Usually router does routing and it is called as Router-on-a-stick, ROAS with several sub-interfaces -1 per subent. 

 

I think you can find some examples of ROAS on here, see https://community.cisco.com/t5/switching/router-on-a-stick-dhcp-not-feed-2nd-vlan/m-p/4063906

 

or more likely on CLN. https://learningnetwork.cisco.com/s/discussions

 

Regards, ML
**Please Rate All Helpful Responses **

Leo Laohoo
VIP Community Legend

Please post the homework/schoolwork in the Cisco Learning Network.

angle1234
Beginner

COOL

majed431
Beginner

isp and edge router.pngHow to connect two routers with 2 cables, one main cable and another alternative, and become one cable

Leo Laohoo
VIP Community Legend

@majed431 

Please post the homework/schoolwork in the Cisco Learning Network.