cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3003
Views
0
Helpful
5
Comments
eelsman
Level 1
Level 1

Hello guys,

 

I am working on a personal project and am trying configure this small network on Packet Tracer. I attached a image of what the network looks like on packet tracer, I know the routers are disconnected. I am trying to get PC's on both sides to communicate. If someone can help me to configure the switches so they communicate properly id really appreciate it.

 

Thanks team,

Erik

Comments
Martin L
VIP
VIP

You need router or layer 3 switch to route traffic between 2 different networks; typically call inter-vlan routing.

Usually router does routing and it is called as Router-on-a-stick, ROAS with several sub-interfaces -1 per subent. 

 

I think you can find some examples of ROAS on here, see https://community.cisco.com/t5/switching/router-on-a-stick-dhcp-not-feed-2nd-vlan/m-p/4063906

 

or more likely on CLN. https://learningnetwork.cisco.com/s/discussions

 

Regards, ML
**Please Rate All Helpful Responses **

Leo Laohoo
Hall of Fame
Hall of Fame

Please post the homework/schoolwork in the Cisco Learning Network.

angle1234
Level 1
Level 1

COOL

majed431
Level 1
Level 1

isp and edge router.pngHow to connect two routers with 2 cables, one main cable and another alternative, and become one cable

Leo Laohoo
Hall of Fame
Hall of Fame

@majed431 

Please post the homework/schoolwork in the Cisco Learning Network.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links