10-12-2017 10:56 PM - edited 03-01-2019 05:21 AM
Hi Guys,
I am setting up a 3 POD Multipod APIC Cluster, the first POD is setup and discovered. The entire cluster has 5 APICs (POD1 - 2 / POD2 - 2 / POD3 - 1, APIC distributions)
So for clarity on the 2nd POD APIC -
Fabric name - same as the 1st POD APIC?
Fabric ID - same as in 1st POD APIC?
no of Controllers - 5
POD ID - 2
Controller ID - 3
Controler name - APIC-3
TEP IP - 10.230.0.0/16 (POD 1's TEP pool)
Infra VLAN - 3111
GIPO - default
Is this accurate and does anyone have a document that details this for Multipod?
Thanks,
Tfash
Solved! Go to Solution.
10-13-2017 03:36 AM
10-13-2017 03:15 AM
Hi,
Yes, same APIC TEP pool and infra VLAN.
Nicolas
10-13-2017 03:33 AM
Thanks for the response, how about the 1st two questions?
Fabric name - same as the 1st POD APIC?
Fabric ID - same as in 1st POD APIC?
10-13-2017 03:36 AM
10-13-2017 04:04 AM
12-08-2017 11:55 AM
Sorry, but I believe this is incorrect. Documentation specifically calls out the use of distinct VTEP Pools per Pod.
# Figure 6
12-08-2017 12:23 PM
You're mixing up switches TEP pool and APIC TEP pool.
Switches will have VTEP allocated to POD2 TEP pool, but APIC in POD2 must have its infra TEP address in POD1 TEP.
Read carefully.
Nicolas
12-08-2017 06:10 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide