cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1257
Views
5
Helpful
2
Replies

Intra EPG Isolation configuration

Torsten_Graf
Level 1
Level 1

Hello Community,

I'm trying to configure private VLAN / Intra EPG isolation in my ACI/VMM environment, but I'm little unsure if i have configured everything correct.

My steps:
1. EPG/VLAN (for the VMs which should be isolated) - Activated Intra EPG Isolation in the EPG
2. Isolated EPG/VLAN
3. In my VMM Domain I configured my EPG/VLAN vor VMs as Primary VLAN and my Isolated EPG/VLAN as Port Encap

- Is this correct the correct way?
- Do I need an Isolated EPG/VLAN for every new Intra EPG Isolation, or can I use my Isolated EPG/VLAN for many Intra EPG Isolation constructs?

Thanks
Torsten

 

 

1 Accepted Solution

Accepted Solutions

Ezzedine
Level 1
Level 1

Hello @Torsten_Graf 
yes you need a new EPG for ever new Isolated EPG, please consider the GW .
here is documentation about Intra-EPG Isolation Enforcement and Cisco ACI 
hopefully that is useful please don't hesitate to ask further if you still have a question.

best regards
Ezzedine

View solution in original post

2 Replies 2

Ezzedine
Level 1
Level 1

Hello @Torsten_Graf 
yes you need a new EPG for ever new Isolated EPG, please consider the GW .
here is documentation about Intra-EPG Isolation Enforcement and Cisco ACI 
hopefully that is useful please don't hesitate to ask further if you still have a question.

best regards
Ezzedine

Torsten_Graf
Level 1
Level 1

@Ezzedine- Thanks for this information. I will have a closer look to the documentation to get the right configuration.

Review Cisco Networking for a $25 gift card

Save 25% on Day-2 Operations Add-On License