port-channel connect to remote peer can it work as L2 and L3

[waleed-samir]

hello all , 

i have one problem if anyone can support . 

1-have two Leafs connect to remote server with one port channel 

2-this port channel have MGM VLAN and traffic VLAN 

3-MGM VLAN should be bind to EPG with BD and route to specific VRF 

4-traffic VLANs will configure one L3out per VLAN 

question

=======

how i can meet this approach? 

when configured like above found error that interface is configured as L2 and cannot be used as L3 . 

[Flavio Miranda]

@waleed-samir 

Although ACI is something quite different from traditional network, this error is expected in any Cisco plataform I know. If you set an interface for L2, you can not use it as L3 and vice-versa.

https://www.youtube.com/watch?v=R7kgyd7Hzv8

This video may give you some help

[Borrego76]

Thank you for sharing this information..