cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2367
Views
5
Helpful
2
Replies
Highlighted
Beginner

Supported ACI Node ID range

What is the supported Node ID range, I know 1 -29 is reserved and the recommendation is to start from 101. but what is the higher limit supported. Can't find this anywhere in documention.

 

Thanks!

Bassam

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Collaborator

Re: Supported ACI Node ID range

 Hi Bassam,

The supported range IDs for switch nodes is 101-4000.

APIC nodess always get get IDs 1-x where x is the number of APICs you have - currently maximum of 3 (or 5 or 7 in a multi-pod fabric - see https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/verified_scalabilty/b_Verified_Scalability_3_0_1x_and_13_0_1x.html)

 

You can find this out by tying to add a node and putting in a large number and examinig the error messageNodeRange.png

or by clicking the i icon at the top of the page:

 

 

Node ID The ID of the APIC controller, leaf, or spine. The range is from 101 to 4000.


 

 

I hope this helps

RedNectar
aka Chris Welsh


Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem

 

 

RedNectar
aka Chris Welsh


Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem

View solution in original post

2 REPLIES 2
Highlighted
Collaborator

Re: Supported ACI Node ID range

 Hi Bassam,

The supported range IDs for switch nodes is 101-4000.

APIC nodess always get get IDs 1-x where x is the number of APICs you have - currently maximum of 3 (or 5 or 7 in a multi-pod fabric - see https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/verified_scalabilty/b_Verified_Scalability_3_0_1x_and_13_0_1x.html)

 

You can find this out by tying to add a node and putting in a large number and examinig the error messageNodeRange.png

or by clicking the i icon at the top of the page:

 

 

Node ID The ID of the APIC controller, leaf, or spine. The range is from 101 to 4000.


 

 

I hope this helps

RedNectar
aka Chris Welsh


Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem

 

 

RedNectar
aka Chris Welsh


Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem

View solution in original post

Highlighted
Beginner

Re: Supported ACI Node ID range

Thank you so much for the answer!