I am looking into this myself. Can the ACE work in this fashion:
Clients VLAN 10
Internet VLAN 20
Cache Servers VLAN 30
Traffic that comes in from clients on vlan 10, any of it that is tcp port 80, send to the cache on vlan 30. Traffic coming back from the internet, vlan 20, if its tcp port 80, send to the cache on vlan 30.
Its basic layer 4 redirection. But when the traffic goes to the cache, the cache is not going to use its own IP to make the internet request, its going to use the clients IP, this is why a map is needed on vlan 10 and vlan 20, to ensure traffic is pipelined thru the ace. Has anyone done this?
