Hi All
I seem to find myself in a bit of a quandary - in that i cannot currently connect to the admin
context remotely while i have access to the testing context i set up and i am unsure how
to connect so as to be able to talk to both the admin context and the testing context.
I have two vlans i am using both of which have interfaces on the test context -
shall we call them xx.xx.151.0/24 and xx.xx.152.0/24.
Now xx.xx.151.0 is where the servers will be and only exists beyond the vip.
xx.xx.152.0 is connected through to the rest of our network.
Now my initial thought was that we could use another 152 vlan int on the 'internal'
side - that is the admin context - but mt tech supportb has kindly pointed out that
i cannot do this -
I believe you get the same mac address on both sides which may cause issues.
So the layer2 resolution to pass data may not work correctly
I believe you get the same mac address on both sides which may cause issues.
So the layer2 resolution to pass data may not work correctly.
So can someone tell me how i get access to the admin context - do i need
another vlan or ip address not on these ranges - just to manage the admin
context ?
Steve