Content Switching

[johnf]

I have a pair of CSS 11154 connected to a pair of edge routers and I have my web servers connected to the CSS's. The servers have four NICs and 2 nics go to one CSS and 2 to the other. If a port fails on one CSS will the load balance take over propperly and switch it through the second CSS. Is this a good implementation or is there a better way?

John

[b59048]

I suggest this link:

http://www.cisco.com/warp/public/117/#cssred

You can setup CSS redundancy in many ways, so I

suggest you read the 5 setups via the link.

It is possible to setup 'interface-redundancy', like

what you are looking for.