cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
429
Views
0
Helpful
2
Replies

cs-150 boot is stoping

mrembetsy
Level 1
Level 1

Anyone tell me why this is happening;

BootRom...booting

Copyright 1998 (c), ArrowPoint Communications

Locked boot flash.

Validating operational boot flash, please wait...

Operational boot flash valid. Jumping to operational boot flash.

Copyright 1998 (c), ArrowPoint Communications

Operational boot flash.

Version 3.10 Build 26

PN: 806-00110-00 Rev: 01.0 SN: 21240020317

Running POST Diagnostics

<2><3><4><6><7><8><12><14><15><28><31><32><33><34><38><44><45><46><48><49><76><7

8><96><99><101><103><105><107><109><111><113><115><117><119><121><130><130><130>

<130><130><130><130><130><130><130><130><130><163><163><163><163><180><181><183>

<185><187><189><191><193><195><196><197><199>

XPIF 3 device version: 0x3001

POST Diagnostics PASSED

Booting into Offdm image at 0xbfd80000

2 Replies 2

Gilles Dufour
Cisco Employee
Cisco Employee

press escape at the beginning of the boot to try to enter diag mode.

Follow the instruction for password recovery to erase nvram and see if it does help.

Otherwise, there is nothing much you can do.

Regards,

Gilles.

Thanks,

I have tried to get into the diag mode, while plugged into the diag and console from the from by pressing ecs at the beginning, but it just doesn't seem to be letting me in. What is the problem exactly? What steps should I take once in diag mode if I can get in? Thanks for your help

Mike

Review Cisco Networking for a $25 gift card