NAT Reflection & NAT Lookup

[Waheed Eladawy]

Morning can anyone provide support

on Cisco ASA, the internal user need to access hosted website through public IP (published from ASA itself), So I've read to achieve this I need to configure NAT Loopback so that the request for the webpage gets resolved by the ASA and then comes back into the firewall.

any ideas ?? 

[MHM Cisco World]

NAT loopback can not be config in ASA, ASA not support Loopback interface.
second 
NAT 1:1 
server in DMZ have private IP, the outside interface of ASA have public IP 
the client in OUT can access Server using one public IP ASA and then ASA will NAT it to Server private IP.
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html

[Waheed Eladawy]

thanks for your reply 

i know the public IP forward traffic to the local IP 

all I need to know is if I can access my public service nating from my firewall from my local address?

[MHM Cisco World]

https://www.firewall.cx/cisco-technical-knowledgebase/cisco-firewalls/1150-cisco-asa-firewall-nat-reflection-loopback-hairpinning-configuration.html
NAT reflection for client IN want to access Server in DMZ