Prevent Routing on CSS11501

[dhellmuth]

Hi,

we're planning to use CSS11501 with 2 Circuits. Ho do I prevent CSS from routing between these 2 circuits ? We want to route the traffic between these circuits/IP range through a FWSM

Any ideas ?

Regards

Dirk Hellmuth (CONET AG, Germany, CCSP)

[d.parks]

If you don't point any hosts' gateways or routes to the CSS circuit addresses, it won't have any traffic to route. Keep in mind however that to properly process application traffic, the CSS needs to see both sides of each connection, either by routing/bridging the traffic, or with a NAT configuration.

[d.parks]

Additionally, you can use ACL's to allow or deny traffic.