cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

206
Views
5
Helpful
3
Replies
Beginner

WAAS WCCP Interception

Is there any performance issues with redirecting wccp 62 on an SVI of the 6500 series switch? The WAN interfaces are not layer 3 but are associated with a vlan that has an SVI configured. I will be using redirect lists for interception.

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Rising star

Re: WAAS WCCP Interception

Depends on the IP addresses being intercepted. The default mask is typically fine for a /23 or /24 address range.

Zach

View solution in original post

3 REPLIES 3
Rising star

Re: WAAS WCCP Interception

Clifton,

On the 6500 platform, you need to follow these recommendations to ensure WCCP redirection happens completely in hardware:

- L2 Forwarding (configured on WAE)

- Mask Assignment (configured on WAE)

- Inbound redirection (configured on 6500)

- No 'ip wccp redirect exclude in' configured (on 6500)

Zach

Highlighted
Beginner

Re: WAAS WCCP Interception

Thanks Zach for the info. One more question.

For mask assignment, shall I use the default settings or should I edit the mask? I have two Core WAEs.

Regards

Rising star

Re: WAAS WCCP Interception

Depends on the IP addresses being intercepted. The default mask is typically fine for a /23 or /24 address range.

Zach

View solution in original post

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here