Hello all,
My company is running WCCP on 6500 VS-S720-10G with IOS 122-33.SXH6 and two Virtual WSA.
We are encountering the following issues:
1. WCCP is not running in hardware.
Based on the following documents WCCP should be run in hardware.
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/116134-config-wccp-6500-00.html
2. All Redirection are not successful unassigned
3. L3 GRE connection with the Virtual WSA is not successful
Any suggestions or sharing on the likely issues are greatly apprecaited.
Thanks in advance.
Router#sh ip Router
Global Router information:
Router information:
Router Identifier: 172.152.254.10
Protocol Version: 2.0
Service Identifier: 90
Number of Service Group Clients: 1
Number of Service Group Routers: 2
Total Packets s/w Redirected: 0
Process: 0
CEF: 0
Redirect access-list: 150
Total Packets Denied Redirect: 0
Total Packets Unassigned: 6955
Group access-list: 50
Total Messages Denied to Group: 0
Total Authentication failures: 0
Total Bypassed Packets Received: 0
Router#sh ip Router 90 d
Router Client information:
Router Client ID: 172.153.5.71
Protocol Version: 2.0
State: NOT Usable (Protocol not L2 connected)
Redirection: L2
Packet Return: L2
Packets Redirected: 0
Connect Time: 1d04h
Assignment: MASK
Router Client ID: 172.152.5.71
Protocol Version: 2.0
State: Usable
Redirection: L2
Packet Return: L2
Packets Redirected: 0
Connect Time: 1d04h
Assignment: MASK
Router#sh tcam int po120 acl in ip
* Global Defaults shared
Entries from Bank 0
Entries from Bank 1
punt tcp host 172.151.17.8 any eq 443
punt tcp host 172.151.17.8 any eq www
permit ip any any
